Packaging - Weight; Overall Dimensions; Firing Rate - Riello RL 190/M Installation, Use And Maintenance Instructions

4.4

Packaging - Weight

• The burners stands on a wooden base which can be lifted by
fork-lifts. Outer dimensions of packaging are indicated in
Tab. B.
• The weight of the burner complete with packaging is indicat-
ed in Tab. B.
4.5

Overall dimensions

The maximum dimensions of the burner are given in Fig. 2.
Bear in mind that inspection of the combustion head requires the
burner to be opened and the rear part withdrawn on the slide
bars.
mm A
RL 190/M 813
4.6

Firing rate

During operation, burner output varies between:
– minimum output : area A
– maximum output : area B
The work point may be found by plotting a vertical line from the
desired delivery and a horizontal line from the pressure in the
combustion chamber.
The intersection of these two lines is the work point which must
lie within area A, for MIN output, and within area B, for MAX out-
put.
The firing rate value (Fig. 3) has been obtained
considering an ambient temperature of 20 °C, an
atmospheric pressure of 1013 mbar (approx. 0 m
above sea level), and with the combustion head
WARNING
adjusted as shown on page 22.
20033337
Technical description of the burner
D1217
B C
366 447
D36
mm
RL 190/M
The maximum dimension of the burner, without casing, when
open is give by measurement I.
D E F
555 712 370
D1975
10
GB
A B C
1200 850 800
G H
222 430
Burner output
Fig. 1
kg
95
Tab. B
Fig. 2
I
1166
Tab. C
Fig. 3