Sync With Flow App; Sync With Flow Web Service Via Flowsync - Polar Electro A300 User Manual

Remember to sync and keep your data up-to-date between your A300, the web service and the mobile app
wherever you are.

SYNC WITH FLOW APP

Before syncing make sure:
You have a Polar account and Flow app
l
You have synced data via FlowSync software at least once.
l
Your mobile device has Bluetooth turned on, and airplane mode/flight mode is not turned on.
l
You have paired your A300 with your mobile. For more information, see Pairing.
l
There are two ways to sync your data:
1. Sign into Flow app and press and hold the BACK button on your A300.
2. Connecting to device
3. Syncing completed
or
1. Sign into Flow app, and on your A300 go to
data and press the START button.
2. Connecting to device
3. Syncing completed
When you sync your A300 with the Flow app, your activity and training data are also synced auto-
matically via an internet connection to the Flow web service.
For support and more information about using Polar Flow app, go to

SYNC WITH FLOW WEB SERVICE VIA FLOWSYNC

To sync data with the Flow web service you need FlowSync software. Go to flow.polar.com/start, and down-
load and install it before trying to sync.
1. Plug your A300 to your computer either directly or with the USB cable. Make sure FlowSync software
is running.
2. The FlowSync window opens on your computer, and the syncing starts.
3. Completed is displayed when you are done.
Every time you plug in your A300 to your computer, the Polar FlowSync software will transfer your data to the
Polar Flow web service and sync any settings you may have changed. If the syncing does not automatically
is displayed, followed by
is displayed when you're done.
Settings > General settings > Pair and sync > Sync
is displayed, followed by
is displayed when you are done.
Connecting to app.
Connecting to app.
www.polar.com/en/support/Flow_app
56