Dip Switch Setting - Furuno FCV-1200L Installation Manual

3.12 DIP Switch Setting

Interface unit IF-8000
Open the cover of the IF-8000. Set DIP Switch S1 according to system configuration, referring
to the illustration below.
EXIF board
Set the DIP switches on the EXIF Board 02P6279 (in the processor unit) according to
equipment connected. No change is necessary when connecting a video sounder which uses a
linear amplifier (FCV-271/382/782, etc.). For video sounder with log amplifier (FCV-1500, etc.)
change the DIP switch settings as below. Early model FURUNO video sounders which have a
log amplifier cannot be connected.
3-22
S1
OFF
J1
J2
External
Monitor
Processor Interface
Unit Unit
S1:All OFF
External
Monitor
Processor Interface
Unit Unit
S1:All ON
External
Monitor
Processor Interface
Unit Unit
Control
Unit
Figure 3-15 Interface unit, cover removed
J3
Monitor
Unit
Control
Unit
Control
Unit
External
Monitor
Interface
Unit
S1:All OFF
S1:All ON