Restoring Default Settings - Furuno FCV-1200L Installation Manual

3.11 Restoring Default Settings

The procedure below restores most default settings. The following settings are not affected:
target setting, language, demo mode, monitor type (portrait, landscape), transducer settings,
user color settings and user clutter settings.
1. Turn on the power and turn the [FUNCTION] switch to the MENU position.
2. Press [ ] and [+] to select SYSTEM at the top of the screen.
3. Press [ ] to select DEFAULT SETTING, and then press [+] to open that menu.
4. Press [+] to open the dialog box.
[-]: NO [+]: YES
5. Press [+] to restore default settings.
6. Three beeps sound and then normal operation is restored.
DISP ALM TX/RX USER-1/2
DEFAULT SETTING
DEFAULT SET : NO
[-/+]: Change set, [EXIT (knob)]: Exit
Figure 3-14 DEFAULT SETTING menu
SYSTEM
3-21