Furuno FCV-1200L Installation Manual page 27

Figure 1-9 How to flush mount unibody type monitor unit
3. Fasten the monitor unit to the mounting location with six self-tapping screws.
Separate monitor unit flush mount kit
Separate monitor unit flush mount kit: Type OP06-17, Code no. 006-556-310
Name
Mounting Fixture
Self-tapping Screw
Hex-head Screw
1. Make cutout in mounting location referring to page D-8A/D-8B.
2. Fasten mounting fixture to monitor unit four hex-head screws.
3. Fasten monitor unit with mounting fixture to mounting location with four self-tapping screws.
Hex-head screws
Mounting fixture
Type Code No.
06-021-1321 100-279-622
5×20 000-162-609-10
M4×12 000-162-939-10
Hex-head screws
Mounting fixture
Figure 1-10 How to flush mount the control unit
Mounting fixture
location changes
with monitor
orientation.
Qty Remarks
1
4
4
Mounting fixture location
changes with monitor unit
orientation.
1-5