Mounting; Monitor Unit, Control Unit - Furuno FCV-1200L Installation Manual

1. MOUNTING

1.1 Monitor Unit, Control Unit

The monitor and control units can be installed as one unit (unibody) or two separate units. The
optional "separate monitor unit installation kit" is necessary when installing them as separate
units. Further, these units can be mounted in a panel (requires optional flush mount kit),
together or separately. See the outline drawings at the back of this manual for details.
Mounting considerations
•
Locate the units out of direct sunlight.
•
The operator should face the bow while viewing the display screen.
•
Select a location where the display screen can be easily observed while operating the control
unit.
•
Leave sufficient space around the units for maintenance and servicing. Recommended
maintenance space appears in the outline drawing at the back of this manual.
Mounting procedure
Desktop mounting
1. Fasten the mounting base to the mounting location with four tapping screws.
NOTICE
Do not apply paint, anti-corrosive sealant
or contact spray to coating or plastic
parts of the equipment.
Those items contain organic solvents that
can damage coating and plastic parts,
especially plastic connectors.
Figure 1-1 Mounting base
1-1