Self-Clean Oven - Rangemaster Professional+ FXP 90 Dual Fuel User's Manual & Installation Instructions

Hide thumbs Also See for Professional+ FXP 90 Dual Fuel:
Table of Contents

Advertisement

Self-Clean Oven

WARNING!
n
n
Remove all cookware, shelves, and the shelf
supports from the oven before using the self-clean
function. If the shelves and supports are left in the
oven they will discolour and become rough.
WARNING!
n
n
Using the self-cleaning function results in higher
temperatures than those for normal cooking. Under
such conditions the surfaces may get hotter than
usual so children should be kept away.
WARNING!
n
n
Remove the divider before using the self-clean
function. See page 8, 'Removing the Divider' .
DO NOT clean the door gasket: the door gasket is
n
n
essential for a good seal. Care should be taken not to
rub, damage or move the gasket.
DO NOT use oven cleaners: no commercial oven
n
n
cleaner or oven liner protective coating of any kind
should be used in or around any part of the oven.
Clean only parts listed in this User Guide.
n
n
DO NOT use the oven light while in self-cleaning
n
n
mode.
Before Using the Self-clean Function
Pre-clean any areas that are not reached by the self-clean
cycle, such as the outer edges of the oven door. Wipe up any
excess fat or liquids.
Before operating the self-clean cycle, use hot water and
detergent or a paste of water and baking soda to remove any
difficult spots. Rinse off all residue with vinegar water. This
will prevent this soil from being baked on by the high heat of
the self-cleaning cycle.
Self-clean Operation
Note: The minute minder can still be used when the clock is
controlling the pyrolytic cycle.
Set the oven function control to self-clean (Fig. 6.6). The
timer display will now show a 'P ' (Fig. 6.7).
Press the [] button once (Fig. 6.8) to set the default
cleaning time (3 hours). The cleaning cycle will start
immediately.
To adjust the cleaning cycle duration, press and hold the []
button. The 'P ' will no longer be displayed and [AUTO] will
flash. Press either the [–] or [+] buttons and set the required
duration; see Table 6.1. Release the [] button once the
duration is set.
Note that the maximum time for the self-cleaning operation
is 4 hours. The minimum time is 1 hour.
The cooling fan will switch to high speed and as soon as a
certain temperature is reached the oven door will lock as
indicated by the illuminated interlock neon (Fig. 6.9).
Prof+ pyro US - MF oven -
ArtNo.302-0002 - 6BC annotated
ArtNo.302-0002 - 6BC annotated
Hours
2 hours
3 hours
4 hours
19
ArtNo.272-0007
Self clean setting
ArtNo.272-0008
Prof+ pyro US - MF oven -
Self clean light on
Soiling
Normal clean
Heavy soiling
Very heavy soiling
Table 6.1
Fig. 6.6
Fig. 6.7
Fig. 6.8
Fig. 6.9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents