B
UTTON SWITCHES
SWITCH
SEL
SHIFT
LF
FF/LOAD
TEAR
PARK
SHIFT+SEL
STATUS
On-line
Off-line
On-line
Off-line
On-line and off-line
Continuous Forms mode
On-line and off-line
Cut sheet manual mode
On-line
Continuous Forms mode
On-line
Cut sheet manual mode
Off-line
Continuous Forms mode
Operating instructions > 30
FUNCTION
Sets the printer to off-line
Sets the printer to on-line
and disalarms the printer
Used only in conjunction
with one of the following
buttons: SEL, LF, FF/LOAD,
PARK, TEAR described
below.
Feeds paper by one line.
Holding the button down
results in continuous line
feeding.
Feeds paper by one line.
Holding the button down
results in continuous line
feeding.
Continuous form fed until
first line of next page
Ejects the cut sheet
Delivers the continuous
form to the cut position. If
the button is pressed again
or data is received, the
original form position is
restored.
Ineffective
Ineffective
If the continuous form is in
position, press to retract the
form to the Pin Tractors.
(If the sprocket holes of the
last page of the form
disengage from the sprocket
pins, do not attempt to eject
the paper as a paper jam
may result.)
Enters menu mode