Oki ML6300 User Manual page 51

PROBLEM
When cut sheets are
used, the content of a
single sheet is printed
on two sheets.
The content of a single
line is printed in two
lines.
When continuous forms
are used, several blank
lines appear in the
printout.
Broken and uneven
vertical lines.
Too large or small line
spacing.
Split print
Blanks appear in
graphic printout.
Blanks or deformed
characters appear in
double height type or
other extended types.
Improper cut sheet feed
No paper feed.
CAUSE
The paper setting
selected in the
application does not
match the physical
paper size.
It does not match the
lines per page as the
printer automatically
detected.
The left and/or right
margins are not
correctly selected.
Tear-off perforation
spacing is selected.
This may happen in
bidirectional printing.
Line spacing is not
selected correctly.
This is a paper feed
error, which is
especially notable in
printing regular
characters.
This is a paper feed
error due to line feeding
in printing a single
character.
Sheets are located off
the paper guide.
Sheets are not loaded
to the end.
Troubleshooting > 51
ACTION
Match the paper setting
selected in the
application with the
physical paper in use.
Leave enough top and
bottom margin in the
application.
Correct the cut sheet LF
adjustment.
Reselect the left and
right margins correctly
in the application.
Cancel tear-off
perforation spacing.
Use Print Registration in
the adjustment mode to
adjust.
Reselect line spacing
correctly in the
application.
This is not a failure.
This is not a failure.
Use the printer's built-in
fonts when you print
important documents or
bills.
Load sheets with their
left edges against the
paper guide.
Load sheets to the end.