Table of Contents
Advertisement
M
ENU SETTING
NOTE
Before changing menu settings, you may wish to print the
current menu settings as in
page 32.
Set menu item values (printed out for reference as you proceed)
as follows:
1.
Press LF (or SHIFT and LF together) to step forward
(backward) through the menu items to the required item.
2.
To change the setting for a selected item, press FF/LOAD
(or SHIFT and FF/LOAD together) to step forward
(backward) through the setting values to the required
setting.
3.
Repeat steps 1 and 2 as required to change settings for
other items.
4.
To exit menu setting, press SHIFT and SEL together to
save the new settings and exit menu setting mode.
NOTE
Switching the printer OFF does not save the new settings.
M
ENU ITEMS AND SETTINGS
In the menu settings tables below, factory default settings are
shown emboldened.
ITEM
Emulation Mode
Print Mode
Pitch
"Confirming current settings" on
FUNCTION
Select EPSON LQ mode,
IBM PPR mode, or IBM
X24 AGM mode.
Select quality of ANK
characters.
Select character pitch.
Operating instructions > 33
SETTING
IBM PPR
IBM AGM
EPSON LQ
LQ Courier
LQ Roman
LQ Swiss
LQ Swiss Bold
LQ Orator
LQ Gothic
LQ Prestige
LQ OCR-A
LQ OCR-B
Utility
HSD
10 CPI, 12 CPI, 15 CPI,
17.1 CPI, 20 CPI
Advertisement
Table of Contents
