Table of Contents
Advertisement
R
ESPONDING TO ALARM CONDITIONS
Use the following table for guidance on how to respond to
indicated alarm conditions.
INDICATOR
SEL
OFF
OFF
OFF
Flashing
Flashing
ALARM MEANINGS AND ACTIONS
ALARM
ON
Paper has run out. Add paper and press the SEL
button.
Flashing
The Paper Type lever is wrongly set for the type of
paper in use. Press the SEL button and set the
Paper Type lever to the correct position.
Flashing
Problem with cut sheet feeding. Remove the cut
sheet.
ON
Print data is received but printing does not start
because no paper is being fed. Insert paper.
Flashing
Printing cannot be resumed at this stage. Turn the
power OFF, verify that the carriage moves
properly, then turn the power ON again.
If the problem is still there after you turn the
power ON again, contact your dealer.
Troubleshooting > 47
Advertisement
Table of Contents
