The heater temperature control system for printing
(Temperature)
Printheater set temperature
Preheater set temperature
Afterheater set temperature
Standby set temperature
Ambient temperature
The heaters are in standby at the temperatures below.
Preheater: 35 ºC
Printheater: 35 ºC
Afterheater: 35 ºC
However, the heaters temperatures above are lowered to the set temperatures if the set temperatures are lower than
the standby temperatures.
Display the heater control menu
Press the HEATER button to display the heater control menu.
Heater operating
information
2nn
Aft
The + sign indicates that
Button operations in the heater control menu
and
and
button
212
Advanced operations
The Printer receives the RIP data.
Set temperature maintained
Afterheater
Printheater
Preheater
50
40
45°C
40
+40
45Pre
the heater is heating.
buttons
Change the digit (select the target of the operations)
buttons
Change the heater temperature or the heater operation.
Set the afterheater, printheater, or preheater on and off individually.
Delay
Standby time
Print
time
Standby temperature
maintained
Heater operating information
Set temperature
Set temperature
(Time)
Temperature control stop
- Force heating ON:
- Normal operation:
- Heater temporarily OFF: