Table of Contents
Advertisement
10.
Turn the knob (1) clockwise (in the direction of the arrow)
to wind up the ribbon.
Do not turn the knob anticlockwise as the ribbon might
jam.
Make sure that the ribbon is not twisted or damaged
when it goes through the gap between the Print Head
and the ribbon guide.
11.
Close the printer Top Cover.
12.
Set the Paper Thickness lever to match the paper being
used.
(See "Setting the Paper Thickness lever" on
page
26.)
13.
Set the printer Power Switch to ON.
CAUTION!
Consumables and accessories > 60
1
Advertisement
Table of Contents
