Line Spacing - Oki Microline 8810 User Manual

Initial Pos.
Choose where continuous form paper will be positioned when the
printer is turned on.
Print [the default]: the paper is in a ready-for-printing position.
Tear: the paper is at the tear-off position.
Language Set
Replaces certain standard symbols with special characters used
in foreign languages. Choose American [the default], French,
German, British, Danish 1, Swedish, Italian, Spanish I,
Japanese, Norwegian, Danish II, Spanish II, Latin American,
French Canadian, Dutch, or Publisher.

Line Spacing

The default is 6 LPI (lines per inch). Change to 8 LPI to get more
lines on a page.
LF Revise
• LF Revise (Cut)
Applies to sheets/forms fed manually using the platform.
• LF Revise (CSFF)
Applies to sheets/forms fed from the optional CSF mounted on the
front of the printer.
• LF Revise (CSFR)
Applies to sheets/forms fed from the optional CSF mounted on the
rear of the printer.
Adjust the line feed value for individual sheets/forms. Settable
from -10 to +10. The default setting is 0.
Load LF Speed
Choose the paper feed speed for inserting sheets when you are
using manual feed from the platform: Fast Speed [the default] or
Slow Speed.
Manual Feed CSF
Applies only when the optional CSF is installed.
Allows you to manually feed in print media through the platform
with the CSF selected, so long as no paper is currently loaded on
the platform.
Microline 8810 User's Guide
59