Oki Microline 8810 User Manual page 22

4. Lift the lock lever (1) on the right tractor (2) and move the tractor over
to correspond to the width of the continuous forms you are using.
Center the paper support (3) between the two tractors.
5. Open both tractor covers and place the first three holes in the
continuous forms paper over the pins.
Important!
Make sure that an equal number of paper holes are engaged
on each tractor. If not, the paper will jam.
Microline 8810 User's Guide
22
F5-05a.JPG
F5-06a.JPG
F5-06b.JPG