Control Panel Lights - Oki Microline 8810 User Manual

Control Panel Lights

Light
POWER
ALARM
AUTO GAP
QUIET
AUTO ALIGN
On
Printer is turned
on.
• Paper is out.
• A paper jam has
occurred.
See
"Troubleshooting"
on page 82.
Auto Gap mode is
selected (the
default).
The printer is in
the Quiet print
mode.
The printer is set
to automatically
align single
sheets/ forms.
Microline 8810 User's Guide
Off
Printer is turned
off.
Printer operation is
normal.
A Manual Gap
setting is engaged.
The printer is in
the Normal print
mode.
Auto Align is
disabled
13
a
Blinking
N.A.
• Awaiting removal of
single sheet/form.
• Media switch is
taking place.
• Skew detection
alarm.
• If both the ALARM
and SEL lights are
blinking, the cover
is open.
• If both the ALARM
and AUTO ALIGN
lights are blinking,
there is an
unrecoverable
error. Try turning
the printer off, then
on again. If this
doesn't clear the
problem call your
service dealer
Manual Gap setting
alarm.
N.A.
If both AUTO ALIGN
and ALARM are
blinking, it indicates
an unrecoverable
error. Try shutting the
printer off and turning
it on again. If this
doesn't work, call your
service dealer.