Explanation Of Menu Items - Oki Microline 8810 User Manual

Explanation of Menu Items

The menu items are listed in alphabetical order.
For a summary of the menu groups, items and settings, see "Menu
Summary" on page 33.
1stDotAdjAlign
Note Auto Alignment must be enabled. See page 50.
Adjusts the set horizontal location for printing the first character
on a form when using manual feed from the platform. Selectable
settings: Left 10, Left 9, ... Left 2, Left 1, Right 1, Right 2 ... Right
9, Right 10, in increments of 1/180 inch (0.14 mm).
The default is 0.
1stDotAdj: Single Sheets/Forms
Note Auto Alignment must be enabled. See page 50.
• 1stDotAdjCSFF
Applies to sheets/forms fed through the optional CSF mounted in
the front of the printer.
• 1stDotAdjCSFR
Applies to sheets/forms fed through the optional CSF mounted in
the rear of the printer.
• 1stDotAdjCut
Applies to sheets/forms fed manually through the platform.
Adjusts the set horizontal location for printing the first character
when using single sheets/forms. Selectable settings: Left 10,
Left 9, ... Left 2, Left 1, Right 1, Right 2 ... Right 9, Right 10, in
increments of 1/180 inch (0.14 mm).
The default is 0.
1stDotAdj: Continuous Forms
1stDotAdjFron
•
Applies to continuous forms fed through the front tractor.
• 1stDotAdjRear
t
Microline 8810 User's Guide
49