Table of Contents
Advertisement
Paper End
Choose what happens when paper end is detected when you are
using manual feed from the platform: On-line [the default] or
Off-line.
Parallel I/F
Only Nibble Mode supports bi-directional.
Choose the printing used by the parallel interface:
Uni-directional or Bi-directional [the default].
Parity
Applies only when the optional RS-232C Serial Interface is
installed.
Settings include None [the default], Odd and Even.
Path Change
Choose whether or not the Tear Off feature is engaged when you
change to the continuous forms path. See page 75. The default
is off (Not Tear Off). To set the printer to automatically engage
the Form Tear feature when it switches to continuous forms
printing, change the setting to Tear Off.
Microline 8810 User's Guide
61
Hide quick links:
Advertisement
Table of Contents
