Sdi Output; Output Format List - Panasonic Varicam 35 Operating Manual

SDI output

Output format is set in [MENU] → [SYSTEM SETTINGS] → [SDI OUT].
One type of image is output from the four BNC terminals: <SDI OUT1> to <SDI OUT4>.
If the setting does not require all four terminals, there may be terminals that do not provide output. If the output format is 3G × 2, images are output from
the <SDI OUT1> and <SDI OUT2> terminals, and are not output from the <SDI OUT3> and <SDI OUT4> terminals.
Status, markers, etc. cannot be displayed.
During playback with the sub recorder, output is muted and the screen becomes black.

Output format list

— indicates that the item is not affected by the settings.
**P becomes the setting value of [SYSTEM MODE] → [FREQUENCY].
[SYSTEM MODE]
[FREQUENCY] [PIXEL]
[23.98p] [4096×2160]
[29.97p]
[24.00p] [4096×2160]
Chapter 8 Output and Screen Display — SDI output
[MAIN CODEC] [HIGH SPEED]
[AVC-Intra4K 444]
—
[AVC-Intra4K 422]
—
—
[AVC-Intra4K-LT] [OFF (1-60fps)]
[ON (60-120fps)]
[AVC-Intra4K 444]
—
[AVC-Intra4K 422]
—
—
[VFR [SDI OUT]
SW]
[P to [4K OUT TYPE]
PsF]
— —
[2 SAMPLE INT]
—
[OFF]
—
[2 SAMPLE INT]
—
[ON]
—
[2 SAMPLE INT]
—
[OFF]
—
[2 SAMPLE INT]
—
[ON]
—
[2 SAMPLE INT]
—
[ON]
—
[2 SAMPLE INT]
—
— —
[2 SAMPLE INT]
—
[OFF]
—
[2 SAMPLE INT]
—
[ON]
—
[2 SAMPLE INT]
—
– 74 –
Output Format
Signal
[SQUARE] 4096×2160
**P*
4:4:4
4096×2160
**P*
4:4:4
[SQUARE]
4096×2160
**P
4:2:2
4096×2160
**P
4:2:2
[SQUARE] 4096×2160
59.94P
4:2:2
4096×2160
59.94P
4:2:2
[SQUARE]
4096×2160
**P
4:2:2
4096×2160
**P
4:2:2
[SQUARE] 4096×2160
59.94P
4:2:2
4096×2160
59.94P
4:2:2
[SQUARE]
4096×2160
59.94P
4:2:2
4096×2160
59.94P
4:2:2
[SQUARE] 4096×2160
24.00P*
4:4:4
4096×2160
24.00P*
4:4:4
[SQUARE]
4096×2160
24.00P
4:2:2
4096×2160
24.00P
4:2:2
[SQUARE] 4096×2160
60.00P
4:2:2
4096×2160
60.00P
4:2:2
Format
3G×4
3G×4
1.5G×4
3G×2
3G×4
3G×4
1.5G×4
3G×2
3G×4
3G×4
3G×4
3G×4
3G×4
3G×4
1.5G×4
3G×2
3G×4
3G×4