Table of Contents
Advertisement
Convenient shooting functions
Zebra patterns display
The camera can display two types of zebra patterns.
The level to display the zebra pattern can be set in [MENU] → [OUTPUT SETTINGS] → [VF EI ASSIST] → [ZEBRA].
Item
[ZEBRA SW]
[ZEBRA1 DETECT]
[ZEBRA2 DETECT]
[ZEBRA2 MODE]
[SPOT]: The image level from the setting value of [ZEBRA1 DETECT] to the setting value of [ZEBRA2 DETECT] is displayed in the zebra pattern.
Displaying the center marker
Displayed when [MENU] → [OUTPUT SETTINGS] → [VF MARKER] → [CENTER MARKER] is set to anything other than [OFF].
Displaying the safety zone marker
The item selected in [MENU] → [VF & VF SDI SETTINGS] → [VF MARKER] → [SAFETY MARKER] is displayed.
The size of the safety zone marker can be changed in [MENU] → [VF & VF SDI SETTINGS] → [VF MARKER] → [SAFETY AREA].
Displaying frame marker
Displayed when [MENU] → [OUTPUT SETTINGS] → [VF MARKER] → [FRAME MARK] is set to [ON].
Set the view angle in [MENU] → [OUTPUT SETTINGS] → [VF MARKER] → [FRAME SIG].
Set the color of the frame marker in [MENU] → [OUTPUT SETTINGS] → [VF MARKER] → [FRAME COLOR].
Set the level for outside in [MENU] → [OUTPUT SETTINGS] → [VF MARKER] → [FRAME LEVEL].
Focus assist function
The focus assist function enables you to focus the target easily.
Enlarged display in the output image from the viewfinder or <VF SDI> terminal, peaking display (display with the contours of the image in red), focus
square display (display in the size of a square displayed in each area), and focus bar display are available.
Chapter 7 Viewfinder — Convenient shooting functions
Sets whether to superimpose the zebra signal on the output from the <VF> terminal and <VF SDI>
terminal.
[ON], [OFF]
f Factory setting: [OFF]
Sets the detection level of zebra pattern 1.
[0%]...[109%]
f Factory setting: [80%]
Sets the detection level of zebra pattern 2.
[0%]...[109%]
f Factory setting: [100%]
Enables/disables zebra pattern 2 and selects [SPOT].
[ON], [SPOT], [OFF]
f Factory setting: [OFF]
Image level
[ON]
[109%]
[ZEBRA2 DETECT]
[ZEBRA1 DETECT]
[0%]
Description of settings
[ZEBRA2]
[OFF]
[SPOT]
– 71 –
Advertisement
Table of Contents
