Power Supply; Turning On The Power - Panasonic Varicam 35 Operating Manual

Power supply

The power can be supplied to the camera main unit from the V-RAW recorder. The DC power supply for the V-RAW recorder is 24 V. A separate power
supply can be supplied to the camera simultaneously. The DC power supply for the camera main unit is 12 V. A power cannot be supplied from the
camera main unit to the V-RAW recorder.
The power is not automatically supplied to the camera main unit from the V-RAW recorder when the power supply from the external DC power supply to
the camera main unit is disconnected. Disconnect the connector for the external DC power supply to the camera main unit once.

Turning on the power

r When turning on the power
1
Connect the V-RAW recorder.
2
Connect the battery or the external DC power supply to the V-RAW recorder.
3
Set the <POWER> switch of the recording module to <ON>.
r When removing the V-RAW recorder
1
Set the <POWER> switch of the recording module to <OFF>.
2
Remove the V-RAW recorder.
@
NOTE
t When attaching or removing the V-RAW recorder, always turn off the power of the camera main unit before performing. It will cause a system error
when the V-RAW recorder is removed with the power turned on.
r Displaying of the power supply condition
V-RAW recorder
No
No
No
Yes
Yes
Yes
Yes
Yes
Chapter 13 V-RAW recorder — Power supply
Extension module
No
Yes
Yes
No
No
Yes
Yes
Yes
– 156 –
The module with lowest power
supply level
—
Recording module
Camera module
Recording module
V-RAW recorder
Recording module
Camera module
V-RAW recorder
Battery charge level indicator
—