Table of Contents
Advertisement
Item
[FOCUS BAR OUT SEL]
[VF EI ASSIST]
[ZEBRA SW]
[ZEBRA1 DETECT]
[ZEBRA2 DETECT]
[ZEBRA2 MODE]
[ZEBRA OUT SEL]
[WFM SW]
[- TYPE]
[- TRANSPARENCE]
[Y GET SW]
[UNIT]
[- AREA SIZE]
[FALSE COLOR SW]
[WFM OUT SEL]
[FALSE COLOR OUT
SEL]
[FILE]
Performs file-related operations such as reading/writing menu settings data from/to an SD memory card.
Item
[SETUP FILE]
[LOAD(SD CARD)]
[SAVE(SD CARD)]
[SAVE AS(SD CARD)]
[PERIPHERAL]
Applies settings related to functions used in conjunction with peripheral devices, such as network and GPS devices.
Item
[GPS]
Chapter 10 Menu Operations — Menu list
Selects the output destination of the focus bar display.
[VF], [VF SDI], [VF & VF SDI]
f Factory setting: [VF & VF SDI]
Sets whether to superimpose the zebra signal on the output from the <VF> terminal and <VF SDI>
terminal.
[ON], [OFF]
f Factory setting: [OFF]
Sets the detection level of zebra pattern 1.
[0%] - [109%]
f Factory setting: [80%]
Sets the extraction level of zebra pattern 2.
[0%] - [109%]
f Factory setting: [100%]
Enables/disables zebra pattern 2 and selects [SPOT].
[ON], [SPOT], [OFF]
f Factory setting: [OFF]
Selects the output destination of the zebra display.
[VF], [VF SDI], [VF & VF SDI]
f Factory setting: [VF & VF SDI]
Displays/hides waveform monitor.
[ON]/[OFF]
f Factory setting: [OFF]
Sets the display format of the waveform monitor.
[Y], [YGBR]
f Factory setting: [Y]
Sets the transparency of the waveform monitor display.
[0%], [25%], [50%], [75%]
f Factory setting: [50%]
Enables/disables the Y GET display function.
The user box function will not operate when [Y GET SW] is set to [ON].
[ON], [OFF]
f Factory setting: [OFF]
Sets the [Y GET] display unit when [MAIN COLOR] is set to [V-Log].
[STOP], [%]
f Factory setting: [STOP]
Sets the size of area to detect with the Y GET display function.
[S], [M], [L]
f Factory setting: [M]
Sets the display of the false color.
[ON], [OFF]
f Factory setting: [OFF]
Selects the output destination of the waveform monitor display.
[VF], [VF SDI], [VF & VF SDI]
f Factory setting: [VF & VF SDI]
Selects the output destination of the false color display.
[VF], [VF SDI], [VF & VF SDI]
f Factory setting: [VF & VF SDI]
Selects the setup file saved to the SD memory card and to be read in the camera.
Overwrites the current setting values in the camera to the file selected from the setup file file list saved to
the SD memory card.
Enters a file name or title name for the file containing the current setting values of the camera and saves it
in the SD memory card as a new setup file.
Configures internal GPS settings.
[ON]: Activates the GPS operation. Outputs the location information as a signal to the <SDI OUT> terminal
and records it as clip metadata.
[OFF]: Does not activate the GPS operation. Does not output and record the location information.
f Factory setting: [OFF]
– 123 –
Description of settings
Description of settings
Description of settings
Advertisement
Table of Contents
