t When a battery is connected to the <DC IN> terminal, set [MENU] → [SYSTEM SETTINGS] → [BATTERY] → [CAM EXT DC IN SEL] to [BATTERY],
then set [CAM BATT END], [CAM BATT NEAR END], and [CAM BATT FULL] according to the features of the battery. The percent (%) display will not
be available for batteries with a battery level indicator function.
Displaying of the power supply condition
Extension module
No
Yes
Yes
Chapter 12 Extension module — Power supply
The module with lowest power supply level
—
Recording module
Camera module
– 150 –
Battery charge level indicator
—