Panasonic Varicam 35 Operating Manual page 70

Item
[VERSION]
False color mode
Check the exposure using the false color.
Image will be displayed with colors sored by luminosity signals. Images of other levels are displayed in black and white.
The false color can be displayed in the viewfinder and the output image from the <VF SDI> terminal.
Display patterns
r When [MAIN COLOR] is [V-Log]
Color
(Red)
(Yellow)
(Pink)
(Green)
(Blue)
(Purple)
* The white clip level will differ depending on the [ON]/[OFF] of [EI] and [HIGH SPEED].
r When [MAIN COLOR] is not [V-Log]
Color
(Red)
(Yellow)
(Blue)
(Purple)
* The white clip level will differ depending on the [ON]/[OFF] of [EI] and [HIGH SPEED]. The white clip level for [3D LUT] will be the same level as for [V-709].
Chapter 7 Viewfinder — Viewfinder status display
Displays the firmware version of the viewfinder.
Level
(White clip −3%) or more*
(White clip −6%) to (White clip −3%)*
48.7% - 51.8%
40.5% - 43.6%
10.3% - 13.2%
7.3% - 10.3%
Level
(White clip −1%) or more*
98% - 100%
2.5% - 4.0%
0% - 2.5%
– 70 –
Description of settings
Description
White-level clip
Lower area of the white-level clip
One-stopover color from neutral gray
18% gray neutral color
Upper area of the black-level clip
Black-level clip
Description
White-level clip
100% level of video output
Upper area of the black-level clip
Black-level clip