Table of Contents
Advertisement
Card access LED
Flashing in green slowly
Off
P2 card recording time
r P2 cards supported on the camera
The optional expressP2, P2, and microP2 memory cards can be used with the camera.
@
NOTE
t AJ-P2C002SG (2 GB) cards cannot be used.
t Refer to our support desk at the following website for the latest information not included in this document.
http://pro-av.panasonic.net/
r Main recorder
Main recording format
([MAIN CODEC])
[AVC-Intra4K 422]
[AVC-Intra100]
r Sub recorder
Sub recording format
([SUB CODEC])
[AVC-Intra2K 422]
[AVC-Intra100]
[AVC-LongG50]
[AVC-LongG25]
@
NOTE
t Indicated capacities include management and other area, so the space available for recording is less than the values in the table above.
Dividing clips recorded on P2 cards
If a P2 card with a capacity of 8 GB or more are used with the camera, recording is automatically continued as another clip when a single continuous
recording time exceeds the following time. The thumbnail operation (display, delete, restore, etc.) for a clip on the P2 devices can be performed as a
operation for a single clip. Clips may be displayed as separate clips in nonlinear editing software and on a computer. When using an expressP2 card in
AVC-Intra 4K 422, and if the recording is performed on a microP2 memory card that exceeds 32 GB in AVC-LongG 50 or AVC-LongG 25, the recording
can be continued as a same clip by selecting [ONE FILE] from [MENU] → [REC SETTINGS] → [FILE SPLIT].
Recording format (excluding native recording)
AVC-Intra 4K 422 (25P/29.97P)
AVC-Intra 100 (1080/50P, 1080/59.94P)
AVC-Intra 100 (1080/25P, 1080/29.97P)
AVC-LongG 50
AVC-LongG 25
CPS (Content Protection System)
The expressP2 memory card (excluding B series) and the microP2 memory card support the security function "Content Protection System" that allows
encryption formatting to prevent data leakage to third party.
To use the CPS function, set a CPS password for the camera, and enable the expressP2 or microP2 memory card authentication and encryption
formatting functions. Encrypted memory cards will be automatically recognized between devices where the same CPS password is set, and recording
and playback of the memory cards will be enabled. For details, refer to "Setting CPS password" (page 45).
Chapter 4 Video Recording and Color Grading — P2 card
Card full
Write protect
Unrecordable card
Card not supported
Illegal format
No card
Unauthenticated card
Setting conditions
[25.00p]/[29.97p]
VFR: [OFF]
VFR: [ON], [50fps]/[60fps]
[25.00p]/[29.97p]
VFR: [OFF]
VFR: [ON], [50fps]/[60fps]
Setting conditions
[25.00p]/[29.97p]
[25.00p]/[29.97p]
[25.00p]/[29.97p]
[25.00p]/[29.97p]
– 44 –
P2 card status
There is no free space on the P2 card. Reading only is possible.
The write-protect switch on the P2 card is at the Protect position. Reading
only is possible.
Recording is not possible by the currently set recording format since
the SD memory card, etc. is inserted. To record the card, change the
recording format or use a P2 card.
This card cannot be used on the camera. Replace the card.
The P2 card is not properly formatted. Reformat the card.
The P2 card is not inserted. The card is waiting to be recognized.
An expressP2 memory card or microP2 memory card that cannot be
authenticated. Select [MENU] → [SYSTEM SETTINGS] → [CARDS/
MEDIA] → [CPS PASSWORD], and enter the password.
Recording time when using a 256 GB expressP2
Approx. 72 min
Approx. 36 min
Approx. 256 min
Approx. 128 min
Recording time when using a 64 GB microP2
Approx. 64 min
Approx. 64 min
Approx. 128 min
Approx. 256 min
Continuous recording time
Approx. 1 min
Approx. 3 min
Approx. 5 min
Approx. 10 min
Approx. 20 min
memory card
memory card
Advertisement
Table of Contents
