Panasonic Varicam 35 Operating Manual page 120

Item
[CENTER MARKER]
[SAFETY MARKER]
[SAFETY AREA]
[FRAME MARK]
[FRAME SIG]
[FRAME COLOR]
[FRAME LEVEL]
[USER BOX]
[USER BOX WIDTH]
[USER BOX HEIGHT]
[USER BOX H POS]
[USER BOX V POS]
[VF INDICATOR] [INDICATOR SW]
[SYSTEM PIXEL]
[SYSTEM FREQ]
[REC FORMAT]
[REC MODE]
[VFR]
[FPS]
[SHUTTER]
[EI]
Chapter 10 Menu Operations — Menu list
Controls the center mark.
[1]: + (large)
[2]: Open center (large)
[3]: + (medium)
[4]: Open center (medium)
[5]: + (small)
[6]: Open center (small)
[7]: + (very small)
[OFF]: Does not display.
f Factory setting: [1]
Selects the type of frame for the safety zone marker.
[1]: Box
[2]: Corners
[OFF]: Does not display.
f Factory setting: [OFF]
Sets the size of the safety zone marker.
[80%] - [100%] (1% step, fixed aspect ratio)
f Factory setting: [90%]
Enables/disables frame marker.
[ON], [OFF]
f Factory setting: [OFF]
Sets frame marker aspect ratio.
[1.33:1], [1.44:1], [1.56:1], [1.78:1], [1.85:1], [2.201:1], [2.35:1], [2.39:1]
f Factory setting: [2.39:1]
Sets the color of the frame marker.
[WHITE], [BLACK], [RED], [GREEN], [BLUE], [YELLOW]
f Factory setting: [WHITE]
Sets the level of the outside of the frame marker.
[0%] - [100%] (10% step)
f Factory setting: [100%]
Displays/hides the user box.
[ON], [OFF]
f Factory setting: [OFF]
Sets the width of the user box.
[1]...[100]
f Factory setting: [13]
Sets the height of the user box.
[1]...[100]
f Factory setting: [13]
Sets the horizontal position of the center of the user box.
[−50]...[50]
f Factory setting: [0]
Sets the vertical position of the center of the user box.
[−50]...[50]
f Factory setting: [0]
Sets whether to display items that will be set by [INDICATOR] in the output from the <VF> terminal and
<VF SDI> terminal.
[ON]: Items are individually displayed/hidden.
[OFF]: Hides all.
f Factory setting: [ON]
Displays/hides system pixels.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides system frequency.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides recording format display.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides the status for the interval recording or the pre-recording.
[ON], [OFF]
f Factory setting: [OFF]
Displays/hides the variable frame rate status.
[ON], [OFF]
f Factory setting: [OFF]
Displays/hides [FPS].
[ON], [OFF]
f Factory setting: [ON]
Displays/hides shutter speed.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides EXPOSURE INDEX.
[ON], [OFF]
f Factory setting: [ON]
– 120 –
Description of settings