Table of Contents
Advertisement
Menu list
[SYSTEM SETTINGS]
Sets the system in general.
is the extended menu. Set [MENU] → [CAMERA SETTINGS] → [Enhanced] → [Enhanced SW] to [ON] to display the extended menu.
f
Item
[SYSTEM MODE]
[FREQUENCY]
[V-RAW]
[MAIN PIXEL]
[MAIN CODEC]
[SUB CODEC]
[VFR SUB REC]
[HIGH SPEED]
[COLOR SETTING]
[MAIN]
[GRADING]
[SUB]
[3D LUT]
Chapter 10 Menu Operations — Menu list
Sets the system frequency.
If the setting of this item is changed, the device must be restarted. If a restart is required, a confirmation
dialog will be shown.
The camera's system operation are determined by four settings: [FREQUENCY], [PIXEL], [MAIN CODEC],
and [HIGH SPEED]. Check the four settings.
[23.98p], [24.00p], [25.00p], [29.97p], [50.00p], [50.00i], [59.94p], [59.94i]
f Factory setting: [23.98p]
Sets the V-RAW format.
Displayed only when the V-RAW recorder is connected.
[4K/12bit], [4K/10bit], [UHD/12bit], [UHD/10bit]
f Factory setting: [4K/12bit]
Sets the main recorder's number of recording pixels.
[4096×2160], [3840×2160], [2048×1080], [1920×1080]
f Factory setting: [4096×2160]
Sets the main recorder's recording codec. Selectable items vary depending on the [FREQUENCY]/[PIXEL]
setting.
[AVC-Intra4K 444], [AVC-Intra4K 422], [AVC-Intra4K-LT], [AVC-Intra2K 444], [AVC-Intra2K 422],
[AVC-Intra444], [AVC-Intra200], [AVC-Intra422], [AVC-Intra100], [ProRes 422 HQ], [ProRes 4444],
[OFF]
[OFF] is displayed only when the V-RAW recorder is connected.
f Factory setting: [AVC-Intra4K 422]
Sets the sub recorder's recording codec. Selectable items vary depending on the [FREQUENCY]/[PIXEL]
setting.
At the same time, this enables/disables proxy data recording.
[AVC-Intra2K 422], [AVC-Intra422], [AVC-Intra100], [AVC-LongG50], [AVC-LongG25], [AVC-Intra2K
422 & Pxy], [AVC-Intra100 & Pxy], [AVC-LongG50 & Pxy], [AVC-LongG25 & Pxy], [OFF]
f Factory setting: [AVC-Intra2K 422]
Sets the operation of the sub recorder during the variable frame rate operation.
[VFR up to 60p (50p)], [NORMAL+Audio]
f Factory setting: [VFR up to 60p]
Sets the high speed mode.
[ON (**-**fps)], [OFF (1-**fps)]
The variable frame rate recording is not possible when the variable range of the variable frame rate is
exceeding 60 fps, and it is displayed with [(NO SUB VFR)].
** represents the variable range of VFR. This will change depending on the [MAIN CODEC] setting.
Depending on the [MAIN CODEC] setting, when [HIGH SPEED] is set to [ON (**-**fps)], [CAMERA
SETTINGS] → [FPS] → [VFR SW] is fixed to [ON].
f Factory setting: [OFF (1-60fps)]
Sets the colors of videos (entire camera system) recorded in the main recorder.
[V-Log]/[V-709]/[3D LUT]
It is fixed to [V-Log] when connected to the V-RAW recorder.
f Factory setting: [V-Log]
Sets whether to apply the grading process.
This only enabled when [V-Log] is set in [MAIN].
[Internal]: Sets grading with the control panel.
[OFF]: Disables the grading process.
[External App]: Sets the grading using an external application.
f Factory setting: [OFF]
Sets the colors of videos (entire camera system) recorded in the sub recorder.
Selectable items vary depending on the [MAIN] setting.
When [MAIN] is set to [V-Log] and [GRADING] is set to [Internal] or [External App]
[V-Log]/[GRADING]
When [MAIN] is set to [V-Log] and [GRADING] is set to [OFF]
[V-Log]/[V-709]
When [MAIN] is set to [V-709]
[V-709]
When [MAIN] is set to [3D LUT]
[3D LUT]
f Factory setting: [V-Log]
Sets the grading process method when [GRADING] is set to [Internal] or [External App].
When [GRADING] is set to [Internal] or [External App]
[OFF]/[V-709]/[LOADED FILE]/[FILE SEL]/[SAVE AS(SD CARD)]
When [GRADING] is set to [OFF]
[OFF]
f Factory setting: [OFF]
– 103 –
Description of settings
Advertisement
Table of Contents
