Using The Setup Utility - IBM x3650 M3 Installation And User Manual

v IBM Advanced Settings Utility (ASU) program

Using the Setup utility

Use these instructions to start the Setup utility.
Use the Setup utility, formerly called the Configuration/Setup Utility program, to
perform the following tasks:
v View configuration information
v View and change assignments for devices and I/O ports
v Set the date and time
v Set the startup characteristics of the server and the order of startup devices
v Set and change settings for advanced hardware features
v View, set, and change settings for power-management features
v View and clear error logs
v Resolve configuration conflicts
158
System x3650 M3 Types 4255, 7945, and 7949: Installation and User's Guide
Use the LSI Configuration Utility program to configure the integrated
SAS/SATA controller with RAID capabilities and the devices that are attached to
it. For information about using this program, see "Using the LSI Configuration
Utility program" on page 172.
The following table lists the different server configurations and the applications
that are available for configuring and managing RAID arrays.
Table 15. Server configuration and applications for configuring and managing RAID arrays
Server configuration
ServeRAID-BR10i adapter
(LSI 1068E)
ServeRAID-BR10il v2 adapter
(LSI 1064E)
ServeRAID-MR10i adapter
(LSI 1078)
ServeRAID-M5014 adapter
(LSI SAS2108)
ServeRAID-M5015 adapter
(LSI SAS2108)
ServeRAID-M1050 adapter
(LSI SAS2008)
Use this program as an alternative to the Setup utility for modifying UEFI
settings and IMM settings. Use the ASU program online or out-of-band to
modify UEFI settings from the command line without the need to restart the
server to access the Setup utility. For more information about using this
program, see "IBM Advanced Settings Utility program" on page 175.
RAID array configuration
(before operating system is
installed)
LSI Utility (Setup utility,
press Ctrl+C), ServerGuide
LSI Utility (Setup utility,
press Ctrl+C), ServerGuide
MegaRAID Storage Manager
(MSM), MegaRAID BIOS
Configuration Utility (press
C to start), ServerGuide
MegaRAID Storage Manager
(MSM), MegaCLI (Command
Line Interface), ServerGuide
MegaRAID Storage Manager
(MSM), MegaCLI (Command
Line Interface), ServerGuide
MegaRAID Storage Manager
(MSM), MegaCLI (Command
Line Interface), ServerGuide
RAID array management
(after operating system is
installed)
MegaRAID Storage Manager
(for monitoring storage only)
MegaRAID Storage Manager
and IBM Director
MegaRAID Storage Manager
(MSM)
MegaRAID Storage Manager
and IBM Director
MegaRAID Storage Manager
and IBM Director
MegaRAID Storage Manager
and IBM Director