IBM x3650 M3 Installation And User Manual page 125

Figure 111. Microprocessor alignment
e. If there is a plastic protective cover on the bottom of the microprocessor,
carefully remove it.
Protective
cover
Microprocessor
Figure 112. Protective cover removal
f. Locate the microprocessor installation tool that comes with the new
microprocessor.
Note: The microprocessor installation tool assembly comes with the
microprocessor and microprocessor cover attached to the tool. The
microprocessor comes protected between the tool and the microprocessor
cover.
Installation tool
Microprocessor
cover
Figure 113. Installation tool
g. Remove the microprocessor installation tool assembly from the package.
Note: Do not rotate the handle on the tool until you are ready to install
the microprocessor into the microprocessor socket.
Chapter 2. Installing optional devices
111