Figure 148. Connecting remote battery cable
10. Install the PCI riser-card assembly in the server (see "Installing a PCI
11. Connect the remote battery cable to the battery carrier.
12. Install the battery on the remote battery tray:
142
System x3650 M3 Types 4255, 7945, and 7949: Installation and User's Guide
9. Install the ServeRAID controller on the riser card (see "Installing a PCI
adapter" on page 53).
riser-card assembly" on page 47).
Attention: To avoid damage to the hardware, make sure that you align the
black dot on the cable connector with the black dot on the connector on the
interposer card. Do not force the remote battery cable into the connector.
a. Connect the battery carrier cable to the battery, if it is not already
connected.
b. On the remote battery tray, find the pattern of recessed rings that matches
the posts on the battery and battery carrier.