Installing The Dimm Air Baffle - IBM x3650 M3 Installation And User Manual

Installing the DIMM air baffle

Use this information to install the DIMM air baffle.
About this task
The following illustration shows how to install the DIMM air baffle.
Figure 36. DIMM air baffle installation
To install the DIMM air baffle, complete the following steps:
Procedure
1. Read the safety information that begins on page "Safety" on page v and
2. Make sure that the server and peripheral devices are turned off (see "Turning
3. Remove the cover (see "Removing the cover" on page 45).
4. Make sure that PCI riser-card assembly 1 is removed (see "Removing a PCI
5. Align the DIMM air baffle with the DIMMs and the back of the fans.
6. Lower the air baffle into place.
7. Install PCI riser-card assembly 1, if needed (see "Installing a PCI riser-card
DIMM air baffle
"Installation guidelines" on page 37.
off the server" on page 23) and that all power cords and external cables are
disconnected.
riser-card assembly" on page 46).
assembly" on page 47.
PCI riser-card
assembly 1
Chapter 2. Installing optional devices
51