Chapter 2. Installing Optional Devices - IBM x3650 M3 Installation And User Manual

Types 4255, 7945, and 7949
Hide thumbs Also See for x3650 M3:
Table of Contents

Advertisement

Chapter 2. Installing optional devices

This chapter provides detailed instructions for installing optional hardware devices
in the server.
In addition to the instructions in this chapter for installing optional hardware
devices, updating firmware and device drivers, and completing the installation,
IBM Business Partners must also complete the steps in "Instructions for IBM
Business Partners" on page 26.
Important: To help ensure that the devices that you install work correctly and do
not introduce problems, observe the following precautions:
1. Make sure that the server and the installed firmware levels support the devices
2. Before you install optional hardware devices, make sure that the server is
3. Follow the installation procedures in this chapter and use the correct tools.
4. Use the best practices to apply current firmware and device-driver updates for
© Copyright IBM Corp. 2013
that you are installing. If necessary, update the UEFI and IMM firmware and
any other firmware that is stored on the system boards. For information about
where firmware is stored in the server, see Chapter 6, "Configuration
information and instructions," in the Problem Determination and Service
Guide. For a list of supported optional devices for the server, see
http://www.ibm.com/systems/info/x86servers/serverproven/compat/us/.
working correctly. Start the server and make sure that the operating system
starts, if an operating system is installed, or that a 19990305 error code is
displayed, indicating that an operating system was not found but the server is
otherwise working correctly. If the server is not working correctly, see the
Problem Determination and Service Guide for information about how to run
diagnostics.
Incorrectly installed devices can cause system failures because of damaged pins
in sockets or connectors, loose cabling, or loose components.
the server and optional devices. To download the IBM System x Firmware Update
Best Practices document, go to www.ibm.com/support/entry/portal/
docdisplay?lndocid=5082923&brandind=5000008. Additional hints and tips
are available from the following sites:
v IBM support: http://www.ibm.com/supportportal/
v System x configuration tools: http://www.ibm.com/systems/x/hardware/
configtools.html
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents