IBM x3650 M3 Installation And User Manual page 93

Figure 71. Rear controller retention bracket removal
16. Install the SAS controller front retention bracket that you got from step 15:
a. Align the retention bracket controller slot so that it faces the rear of the
server.
Figure 72. SAS controller front retention bracket installation
b. Place the bracket tabs in the holes on the chassis and slide the bracket to
left until it clicks into place.
17. Remove the fillers (if they are installed) from the four connectors on the SAS
expander card that comes with the option kit.
Figure 73. Fillers removal
18. Install the SAS expander card:
Chapter 2. Installing optional devices
79