Saeco Grand Baristo User Manual page 21

11
SPECIAL BEVERAGES
HOT WATER
RISTRETTO
ESPRESSO MILD
ESPRESSO INTENSO
12
HOT WATER
INSERT
WATER SPOUT
13
14
15
PROFILE SAECO
When you have not used the machine for 2 or more weeks, the machine
will automatically perform a rinse/self-cleaning cycle after you turn it on.
Following this, you need to perform a manual rinse cycle as described
above.
The automatic rinse/self-cleaning cycle also starts when the machine has
been in stand-by mode, or turned off , for more than 15 minutes.
At the end of the cycle, you can brew products.
Press the " " button.
Press the " " button. At the end of the warm-up phase, the machine
starts dispensing water.
After dispensing water, remove and empty the container.
Repeat the steps from 10 to 13 until the water tank is empty, then
continue with step 15.
At the end, fi ll the water tank again up to the MAX level. Now the ma-
chine is ready to brew coff ee.
This icon will be displayed.
Note:
ENGLISH
19 19