Saeco Grand Baristo User Manual page 95

RINSING
RINSING
START
18 The rinse cycle starts. The bar shows the progress status of the process.
Note:
To empty the container during the process and to pause the rinse cycle,
press the " " button. To resume the cycle, press the "
Note:
The rinse cycle is performed in order to have the circuit cleaned with a pre-
set amount of water to ensure proper machine performance. If the water
tank is not fi lled up to the CALC CLEAN level, the machine might require
more than one cycle.
19 When the amount of water needed for the rinse cycle has been
completely dispensed, the machine automatically ends the descaling
process.
20
At the end of the descaling process, the machine performs an auto-
matic rinse cycle. Wait until it is over before removing and emptying
the container.
21 Disassemble and wash the milk carafe as described in the "Weekly
Cleaning of the Milk Carafe" chapter.
22 Empty the (internal) drip tray and place it back.
23 Put the AquaClean water fi lter (if any) back into the water tank.
Note:
At the end of the descaling cycle, wash the brew group as described in the
"Weekly Cleaning of the Brew Group" chapter.
ENGLISH
93 93
" button.