Saeco Grand Baristo User Manual page 101

Machine actions
Coff ee leaks out of the
dispensing spout.
The dispensing spout can-
not be installed onto the
milk carafe.
The machine does not con-
nect to the application.
Causes
The dispensing spout is clogged or
not correctly inserted.
The pin is in the wrong position.
The mobile device is too far away
from the machine.
Note:
These problems can be considered normal if the coff ee blend has been
changed or if the machine has just been installed. In this case, wait until
the machine performs a self-adjusting operation as described in the "Saeco
Adapting System" chapter.
ENGLISH
Solutions
Clean the dispensing spout and its holes
and insert it back correctly.
Manually push the pin to the correct
position and insert the carafe dispens-
ing spout.
Do not step more than 5 metres away
from the machine while using the
mobile device.
99 99