Installing The Insulation Cover - Buderus GB162-65 Installation Instructions Manual

 Connect the mains cable connector (fig. 22, item 1)
to the pump.
5.9

Installing the insulation cover

 Feed the insulation cover with its upper edge into the
groove in the lower support (fig. 23).
NOTE
The door over the boiler control panel must
be closed.
pump group Logamax plus GB162-65/80/100 - Subject to modifications resulting from technical improvements!
fig. 21 Laying the pump connection leads
Item 1: Pump connection cable
fig. 22 Connecting the pump
Item 1: Mains cable connector
fig. 23 Installing the insulation cover
Installation 5
1
1
17