5.5
Installing the syphon
DANGER OF FATAL ACCIDENT
due to poisoning.
If the syphon is not filled with clean
water, flue gas can escape and put
people's lives at risk.
Fill the syphon (supplied with the boiler) with clean
water (fig. 13).
Connect the syphon (fig. 14, item 1) to the conden-
sate drain outlet (CDO).
NOTE
The trap is fitted with a bayonet connection.
After pushing [1.] the trap upwards into
place, you have to turn it a 1/4 turn
anticlockwise [2.] until it locks into position.
pump group Logamax plus GB162-65/80/100 - Subject to modifications resulting from technical improvements!
fig. 13
Filling the syphon with clean water
1.
2.
1
fig. 14
Installing the syphon
Item 1: Syphon
Installation
5
13