Installation
4
Fig. 10 Header
4.3
Installing the insulation
NOTICE
First start up the cascade system and test
the system for leaks. Then install the insu-
lation.
Install the rear insulation over the header (
[1]).
Install the rear insulation part over the low loss
header
→
(
fig. 10, [2]).
If required, trim the insulation so that it is straight
→
(
fig. 10, [3]).
1
2
Fig. 11 Inner insulation
For 2½" and 3" low loss header:
- install the inserts in the outer insulation.
For a 2½" low loss header:
- install the reducing inserts in the outer recesses
→
(
fig. 11, [2]).
For a 3" low loss header:
- install the reducing inserts in the inner groves
→
(
fig. 11, [1]).
Click the insulation together.
Logamax plus GB162-80 kW/100 kW – Subject to modifications resulting from technical improvements!
1
3
2
→
fig. 10,
1 2
Install the front insulation of the low loss header.
If required, trim the insulation so that it is straight
→
(
fig. 10, [3]).
Install the end cover over the header (
4
→
fig. 10, [4]).
9