Select Vibrate Cadence
Procedure Steps
Step
1
2
3
4
5
6
7
8
9
10
Select Ring Delay
Procedure Steps
Step
1
Copyright © 2008 Nortel Networks
.
Action
While the handset is in standby mode, press the Cfg soft key.
Use the Nav keys to scroll to Use Profiles.
Press Enter to select the Use Profiles. The next menu level is
displayed.
Use the Nav keys to scroll through the menu and highlight one of
the settings (an asterisk [*] indicates the selected/active setting).
Press Enter to select the option.
Use the Nav keys to scroll to Vibrate Cadence.
Press Enter to select the option.
Use the Nav keys to highlight one of the following:
•
Off (default)
•
PBX
•
Continuous
•
Short Pulse
•
Long Pulse
Press Enter to choose the cadence.
Do one of the following:
•
to return to the previous menu and choose another option,
press Back, or
•
to exit all menus and return to the standby state, press the
End key.
Action
While the handset is in standby mode, press the Cfg soft key.
Attention: Ring Delay does not appear in the menu when Ring
Cadence or Vibrate Cadence is turned off.
Carrier VoIP
Nortel IP Phone WLAN Handset User Guide (CICM)
NN10042-116 04.01 Standard
4 July 2008
Select Ring Options 99
--End--