Select Noise Mode; Change The Key Tones; Carrier Voip; Nortel Ip Phone Wlan Handset User Guide (Cicm - Nortel NN10042-116 User Manual

92 Using the User Option menu
•
•
Prerequisites
The handset must be in standby mode.

Select Noise Mode

Procedure Steps
Step
1
2
3
4
5
6
7

Change the Key Tones

Procedure Steps
Step
1
Copyright © 2008 Nortel Networks
.
Display Contrast — controls the amount of contrast for the display.
Keypad Autolock — controls automatic locking of the keypad when the
handset is in standby mode.
Action
Perform one of the following options:
•
press and hold the FCN key, the User Options menu
appears, or
•
while the handset is in standby state, press the Cfg soft key.
Use the Nav keys to scroll through the menu and highlight
Phone Options, press Enter to select the option. The next menu
level is displayed.
Use the Up and Down Nav keys to scroll through the list and
select Noise Mode.
Press Enter..
The Noise Level submenu appears.
Use the Nav keys to scroll through the menu and highlight one
of the following settings (an asterisk [*] indicates the selected
setting): Normal, High, or Severe.
Press Ok.
Perform one of these actions:
•
to return to the previous menu and choose another option,
press Back, or
•
to exit all menus and return to the standby state, press the
Power Off/End Call key, or press Exit.
Action
While the handset is in standby mode, press the Cfg soft key.

Nortel IP Phone WLAN Handset User Guide (CICM)

NN10042-116 04.01 Standard
--End--

Carrier VoIP

4 July 2008