Table of Contents
Advertisement
Procedure Steps
Step
1
2
3
Viewing your login type
Follow this procedure to view your login type.
Nortel IP Phone WLAN Handset 2210 Series and WLAN Handset 6100
Series wireless handsets can operate in one of two login types:
•
•
Prerequisites
The User menu must be displayed. See
menus" (page
Procedure Steps
Step
1
2
Changing your password
Follow this procedure to change your log on password.
Copyright © 2008 Nortel Networks
.
Action
From the User menu, select and open Auto Login.
The AutoLogin screen appears.
Use the navigation key to select Enabled.
Press Ok.
Unique — the ability to join a session when the m6350 Softclient is not
enabled.
Joint — the ability to operate in a joint session when the m6350
Softclient is enabled.
In this scenario, the handset always adopts the Master position, in
their Master Slave relationship, which implies that all audio is rooted to
the physical set. The handset behaves the same as any other wired
IP Phone, it does not support a joint session with another physical
terminal.
61).
Action
From the User menu, select and open Login Type.
Use the navigation keys to view the Unique screen and the
Joint screen.
A check mark indicates the current selection.
Nortel IP Phone WLAN Handset User Guide (CICM)
NN10042-116 04.01 Standard
--End--
"Navigating the User information
--End--
Carrier VoIP
4 July 2008
Changing your password 63
Advertisement
Table of Contents
