Configuring Auto Hide; Carrier Voip; Nortel Ip Phone Wlan Handset User Guide (Cicm - Nortel NN10042-116 User Manual

Prerequisites
You must first access the Feature menu. To access the Feature menu see
"Navigating the Feature menu" (page
Procedure Steps
Step
1
2
Configuring Auto Hide
Procedure Steps
Step
1
2
3
Copyright © 2008 Nortel Networks
.
Action
From the Feature menu, select and open Options.
The Options menu appears.
Select a menu item:
•
Auto Hide: see
•
Default Feature: see
•
Outbox: see "Enabling or disabling the CICM Outbox" (page
56)
Action
Follow this procedure to enable or disable the Auto Hide feature.
When you complete this procedure, you must log out, and then
log back in for the functionality to take effect.
For additional information, see
From the Options menu, select and open Auto Hide.
The Auto Hide screen appears.
Perform one of these steps:
•
To enable Auto Hide, select Enable.
•
To disable Auto Hide, select Disable.
Press Ok.
A check mark appears beside your selection.

Carrier VoIP

Nortel IP Phone WLAN Handset User Guide (CICM)

NN10042-116 04.01 Standard
4 July 2008
Using the Options menus 55
51).
"Configuring Auto Hide" (page 55)
"Assigning a default DN key" (page 56)
--End--
"Auto Hide" (page
--End--
56).