Table of Contents
Advertisement
4
5
6
7
8
Select Ring Options
Follow these procedures to change the ring-tone or any other ring setting.
You must first select a profile, your handset ring behavior is established
by five User Profiles:
•
•
•
•
•
The currently-active user profile is shown on the standby display. While
the handset is in standby mode, you can change the ring behavior by
pressing Prof and selecting a new profile from the list. The currently-active
profile is marked with an asterisk (*).
Attention: Check with your system administrator for the Ring Options
available on your handset.
The Ring Options menu has the following:
•
Copyright © 2008 Nortel Networks
.
Use the Nav keys to scroll through the menu and highlight
Keypad Autolock.
Press Enter to select the setting.
Use the Nav keys to scroll through the menu and highlight one
of the following settings (an asterisk [*] indicates the selected
setting): Disable (default), 5 seconds, 10 seconds, and 20
seconds.
Press Enter.
Do one of the following:
•
to return to the previous menu and choose another option,
press Back, or
•
to exit all menus and return to the standby state, press the
End button.
Silent
Vibrate
Loud
Soft
Custom
Telephone Ring — presents a submenu of choices that you can set:
— Ring Cadence
— Ring Tone (see Note 1)
Nortel IP Phone WLAN Handset User Guide (CICM)
NN10042-116 04.01 Standard
--End--
Carrier VoIP
4 July 2008
Select Ring Options 95
Advertisement
Table of Contents
