4
Enable the Lock Key menu
Follow this procedure to enable the Lock Key menu to lock the wireless
handset.
Procedure Steps
Step
1
2
3
4
5
Select Phone Options
Phone Options presents a menu of choices, such as, Noise Mode, Key
Tones, Warning Tones, Display Contrast, and Keypad Autolock.
•
•
•
Copyright © 2008 Nortel Networks
.
Do one of the following:
•
to return to the previous menu and choose another option,
press Back, or
•
to exit all menus and return to the standby state, press the
End key.
Action
To lock the keypad, while the handset is in standby mode,
press the Cfg softkey.
Use the Nav keys to scroll through the feature menu and
highlight the Lock Keys feature.
Press Enter to lock the keypad.
To unlock the keypad, go to Step 4.
While the handset is in standby mode, press the Unlk soft key.
Press # to unlock the keypad.
Noise Mode — enables the user to adjust the handset for different
levels of noise within the work environment. There are three noise
level modes: Normal, High, and Severe. Changing the Noise Mode to
High or Severe adjusts the handset's microphone and in-ear speaker
volume to account for background noise. Select Normal: for most office
environments; High: for moderate background noise; or Severe: for
extremely noisy conditions. If you use High or Severe modes in a quiet
environment, your caller may find it difficult to hear your voice.
Key Tones — controls whether pressing a key plays a tone.
Warning Tones — controls whether warning tones are played when
out-of-range or during power up and power down.
Nortel IP Phone WLAN Handset User Guide (CICM)
NN10042-116 04.01 Standard
--End--
--End--
Carrier VoIP
4 July 2008
Select Phone Options 91