Enabling Or Disabling Auto Hide - Nortel IP Phone 2001 User Manual

Enabling or disabling Auto Hide

Follow this procedure to enable or disable the Auto Hide feature. The Auto
Hide feature allows only those features that are available for use to appear in
the display. Feature availability depends on the state of the terminal, and the
administrator settings.
Prerequisites
You must be logged on.
Procedure steps
Step
1
2
3
4
5
6
7
Copyright © 2006, Nortel Networks
- 78 -
Using the Feature menu
Action
From the main menu, open the Settings menu.
From the Settings menu, open the Call menu.
From the Call menu, open the Feature menu.
From the Feature menu, select Options.
Press Ok.
The Options menu opens.
Perform one of these steps.
• To enable Auto Hide, select Enable.
• To disable Auto Hide, select Disable.
Press Ok.
A check mark appears beside the item to indicate if the feature is
enabled or disabled. You return to the Options menu.
Carrier VoIP
Nortel IP Phone 2001 User Guide
NN10300-005 06.04 Standard
(I)SN09U October 2006
--End--
Nortel Networks Confidential