Performing A Reset Operation - Nortel Passport 4400 Using Manual

A pop-up menu appears.
:
2
Click on Test.
A Diagnostics panel opens, showing the results of the diagnostic test. For
example:
If you wish to run the diagnostic test again, click on Check.

Performing a Reset Operation

As you work with Install Tool, your pending configuration changes are held in
volatile memory (DRAM). When you perform a Save & Reset operation, the
Passport 4400 saves those changes to the active configuration data bank in
nonvolatile (Flash) memory, then resets the unit.
To perform a Save & Reset operation, follow these steps:
Using Passport 4400 Install Tool Version 4.2
85