Table of Contents
Advertisement
Procedure steps
Step
1
2
3
Removing a power filler panel
A power filler panel maintains the proper cooling airflow in the Ethernet
Routing Switch 8600 chassis. You must remove the power filler panel from
the power bay when you install a power supply in a bay for the first time
Copyright © 2008 Nortel Networks
.
Action
Remove the equipment from the shipping container and place
the chassis on antistatic material.
Check all items for damage.
ATTENTION
If the equipment is damaged, contact your Nortel sales
representative.
Use the following chassis shipping accessories checklist to verify
that the shipping container includes all contents.
Check
Accessory
Bracket kit: two
rack-mounting brackets
and Phillips-head screws.
Screw package
Side cable-management
bracket: two brackets for
the 8010 chassis and one
bracket for the 8006 and
8003 chassis
Rubber footpads
Console cable with built-in
adapter.
Cable guide
Nortel Ethernet Routing Switch 8600
Quick Start
NN46205-310 02.01 Standard
30 May 2008
Removing a power filler panel 33
Use to
Support the chassis in an
equipment rack.
Mount the chassis in an
equipment rack.
Manage network interface
cables.
Keep the chassis from
slipping when mounting
on a flat surface.
Connect an optional
management console to
the chassis. Each cable
end has a female DB9
and a DB25 connector.
Keep cable clusters
fastened and out of the
way, but accessible for
maintenance.
--End--
Advertisement
Table of Contents
