Table of Contents
Advertisement
8
Installing a module
Install a Metro Ethernet Routing Switch 8600 module.
You can install a Metro Ethernet Routing Switch 8600 module with the
power on or off. If you install a module in the same chassis slot where the
same type of module was previously installed, the previous configuration is
maintained for that module in that slot. With the 8672ATME, 8672ATMM,
and 8683POSM modules, the configuration is maintained only if the same
type of MDAs are used. In all other cases, a module installed in an Ethernet
Routing Switch 8000 Series chassis resets to factory defaults.
Prerequisites
•
Copyright © 2005-2007, Nortel Networks
.
Removing a module: 8010co chassis
If you are installing a replacement module, go to
module" (page
81). Otherwise, install a filler panel (see
a filler panel" (page
Review the antistatic precautions on
(page
75).
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
Installing and replacing a module 81
75)).
—End—
"Installing and replacing a module"
"Installing a
"Installing
Advertisement
Table of Contents
