Table of Contents
Advertisement
66 Metro Ethernet Routing Switch 8600 modules
Label
CPU
Utilization
(8 LEDs)
Power
Supply
1, 2, 3
Fan 1, 2
Temp
Master
Online
Ethernet management port
Ethernet management port on the 8691omSF module is an MDI
10/100BaseT port that allows out-of-band management of the switch
using a Web browser or Device Manager. You can also establish a Telnet
session to access the CLI. Use this port to connect the switch to a network
management station. The Ethernet management port has its own IP
address but does not switch traffic to other ports in the chassis.
Copyright © 2005-2007, Nortel Networks
.
Color/State
Meaning
Green
The number of lit LEDs indicates the level of
CPU activity as follows:
1 LED = 12%
2 LEDs = 24%
3 LEDs = 36%
4 LEDs = 48%
Green/Steady
The specified power supply is operating
normally.
Amber/Steady
The specified power supply has a fault.
Off
A power supply is not present in the specified
bay, or the power supply in the specified bay
is not turned on.
Green/Steady
The specified fan is operating normally.
Amber/Steady
The specified fan has failed.
Green/Steady
The temperature is normal for switch operation.
Amber/Steady
The temperature of the switch has exceeded
the maximum operating temperature.
Green/Steady
The CPU subsystem on the module is
performing diagnostics.
Green/Blinking
This module is providing active CPU functions
for the switch and is the master CPU module.
Amber/Steady
The CPU subsystem is in a fault state.
Off
The CPU subsystem on the module is up and
is in standby mode.
Green/Steady
The switch fabric portion of the module is online
and is load-sharing.
Amber/Steady
The switch fabric portion of the module failed
diagnostics.
Off
The switch fabric portion of the module is
offline.
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
5 LEDs = 60%
6 LEDs = 72%
7 LEDs = 84%
8 LEDs = 100%
Advertisement
Table of Contents
